NF M60-333-2011 核能的核燃料循环技术:液体肥料或固体废料中碘129的测定.

上一篇: NF M60-441-2011 用极限燃耗效益法对含有压水反应堆二氧化铀燃料的系统进行评估,并判定核临界安全性.
下一篇: IEC/TS 61400-26-1-2011 风力涡轮机.第26-1部分:风力涡轮机发电系统的时间有效性

Product Code:SAE J1996
Title:Internal Combustion Engines--Piston Rings--Quality Requirements (Cancelled Jun 2008)
Issuing Committee:Piston And Ring Standards Committee
Scope: This SAE Standard specifies the quality aspects that are capable of definition but not normally found on a drawing specification. The difficulty of trying to define in absolute terms the quality attainable in normal commercial manufacture of piston rings is well known. In this document the commonly encountered aspects of quality in terms of casting defects and other departures from ideal are quantified. Many minor defects are clearly quite acceptable; other defects because of size or numbers are inadmissible. This document covers the following: a) Single piece piston rings of grey, carbidic, malleable, spheroidal graphite cast iron or steel; b) Multipiece pistong rings (oil control rings) consisting of cast iron parts and spring components; c) Single piece and multipiece rings of steel, i.e., oil control rings in the form of strip steel components or steel segments (rails) with spring expander components. In addition to specifying certain limits fo acceptance relating to inspection measuring principles (covered by SAE J1589) this document also covers those features for which no recognized quantitative measurement procedures exist and which are only checked visually with normal eyesight and without magnification. Such features (superficial defects) are additional to the standard tolerances of ring width, radial wall thickness, and closed gap. The requirements of this document apply to all rings up to and including 200 mm diameter covered by the above classification for both reciprocating internal combustion engines and compressors.【英文标准名称】:Textiles-Assessmentoftheignitabilityofbeddingitems-Part1:Ignitionsource:smoulderingcigarette(ISO12952-1:2010);GermanversionENISO12952-1:2010
【原文标准名称】:纺织物.床上用品易燃性评估.第1部分:着火源:阴燃香烟(ISO129521-2010);德文版本ENISO12952-1-2010
【标准号】:DINENISO12952-1-2011
【标准状态】:现行
【国别】:德国
【发布日期】:2011-01
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:床上用品;燃烧特性;卷烟;定义;耐久性;定义(术语);燃烧试验;防火测试;易燃性;着火性;火源;材料测试;材料试验;;床单;发烟燃烧;试验报告;试验;测试;痕量元素分析;测试条件;试验条件;纺织产品;纺织材料
【英文主题词】:Bedding;Burningbehaviours;Cigarettes;Definitions;Firetests;Flammability;Ignitability;Ignitingsources;Materialstesting;Plumeaucases;Sheets(bed);Smouldering;Testreports;Testing;Testingconditions;Textileproducts;Textiles
【摘要】:
【中国标准分类号】:W57
【国际标准分类号】:13_220_40;97_160
【页数】:20P;A4
【正文语种】:英语